Our Abundance Mandala stencil is based on a classic floral medallion and symbolizes the richness and abundance of life. With it's beautiful foliate elements this mandala looks great stenciled on a table or reclaimed wood as a wall art. Our detailed Mandala stencils come in different sizes, so you can choose the perfect stencil to fit your DIY needs.
For the mandalas that are 18" to 30",
you will be receiving a full medallion. For the 36" and 44" mandalas,
you will receive half of the design and to complete the medallion, pick
up the stencil after completing one side, flip it and line up the
registration marks (see photo above), tape it and do it again. For the
60” and 74” mandalas, you will receive a quarter of the design. To
complete the design, place a pin in the center of the design (hole
provided), tape and stencil the medallion quarter. After completing one
quarter, rotate the mandala over to complete the half using the
registration marks. Rotate the mandala until you’ve completed the whole
This medallion stencil is so easy to use, virtually
anyone can do it. Simply tape it to the wall using BLUE
painter's tape, then load your foam roller with the paint of your choice
(latex or acrylic). Get rid of excess paint by rolling the foam roller over a folded paper towel.
Then, just roll it over the stencil applying medium pressure for an
instant fabulous result! Don't press on the roller too hard otherwise
you might get some paint seepage under the stencil.
Want to learn the easiest stenciling technique? Here are the detailed illustrated Roller Stenciling Tips.
This is an easy design to stencil with a dense foam roller. For expert stenciling tips, please watch our How-to stencil videos! You'll find them extremely helpful for your stenciling project. Even beginners get great results!
Although most of our stencils do not require the use of spray adhesive,
if your walls have a texture to them, it might be a good idea to use
spray adhesive to help minimize paint seepage (Elmer's spray adhesive
seems to be the best). Make sure you shake the can well and lightly mist
(not drench) the stencil, and let it dry for a moment before
positioning it on the wall. This step will prevent the adhesive residue
transferring to the wall. You'll need to re-mist the stencil after a few
repeats. Note: you
will still need to hold the stencil in place with a few pieces of blue
painters tape! Adhesive by itself is not enough to hold the stencil on
the wall. Clean-up tip:Spray
the stencil with Simple Green to help to remove adhesive residue and
let it sit for a while before cleaning with soap and water. Please note
that it is virtually impossible to get rid of all adhesive residue.
That's why we personally prefer not to use it and just stick with
on rough or textured walls may contribute to increased paint bleed. For
more information on stenciling on textured walls, see our F.A.Q. section.
About seepage and imperfections:
Even with a proper loaded roller and correct technique you might get
some minor paint seepage here and there. In most cases it's not
noticeable, especially from a couple of feet away and it can be easily
touched up with a small brush. Don't forget that you're creating a
"hand-painted wall finish". A few imperfections and some paint seepage
here and there are natural and inevitable for this type of work. To
avoid seepage, use spray adhesive and less paint on your roller and
Did you know you can stencil your own fabric
and use it for curtains, tablecloths, pillows, etc.? When stenciling on
fabric, please use stencil adhesive to ensure good results. First, tape
your ironed fabric to the surface so it doesn't move around while you
stencil. You'll get better results with stencil brushes, but sometimes
roller can work too, depending on your fabric. Add some textile medium (
sold in craft stores) to your acrylic paint. You can also get a
specially formulated fabric paint, but, frankly, good craft acrylic
paint with a dollop of textile medium mixed in works just as well, and
costs way less! :) Let the stenciled image dry completely, 24 hours is
best, then heat-set it by ironing the fabric for about 20-30 seconds on a
LOW setting through the piece of cloth. Heat-setting will cure the
paint and will prevent it from being washed off in the washing machine.
Always experiment with a sample of your fabric first to ensure good
results. We have stenciled on silk, cotton, linen and even sheer fabrics
with great results. It's always better if your fabric doesn't have too
All of our stencils
are made of thick, sturdy but flexible 12 mil clear plastic, reusable,
easy to clean and stenciler-friendly! In our 20+ years of professional
stenciling this material has proven to be far superior than any other
material we used, including the industry standard 8 mil mylar.
are certain you'll notice the difference and will love working with it,
just like all the folks who already bought our stencils.
Our stencils are made to last and with proper care and storage will serve you for long time.