Which stencil paint to use? You can stencil with acrylic or latex paint, stencil creams, glaze, etc. It's best to have your walls painted in flat latex paint as it makes a perfect base coat for stenciling. For stenciling on tile floors, use Stix adhesive primer as your base coat, tinted to the color of your choice and then stencil with latex or acrylics as usual. We do not recommend oil paint or spray paint for stenciling. Use a dense foam roller or stencil brush. If you want nice crisp edges, using spray adhesive may be very helpful (Elmer's seems to be the best) to ensure minimal bleed.
The main rule of stenciling is to use less paint! Please take care not to over-load your roller or brush with paint and not to press hard on a roller while stenciling. Always blot off the extra paint onto a folded paper towel before rolling over the stencil.
on rough or textured walls may contribute to increased paint bleed. For
more information on stenciling on textured walls, see our F.A.Q. section.
About seepage and imperfections:
Even with a proper loaded roller and correct technique you might get
some minor paint seepage here and there. In most cases it's not
noticeable, especially from a couple of feet away and it can be easily
touched up with a small brush. Don't forget that you're creating a
"hand-painted wall finish". A few imperfections and some paint seepage
here and there are natural and inevitable for this type of work. To
avoid seepage, use spray adhesive and less paint on your roller and
Our stencils are made to last and with proper care and storage will serve you for long time.