Wall Art Stencils


New Tribe Mandala Stencil

$36.95

Qty
Size:
Sku: MD007
Single overlay stencil

Offered in 5 sizes:
18-inch diameter
24-inch diameter
30-inch diameter
36-inch diameter - half medallion
44-inch diameter - half medallionSaveSaveSaveSaveSaveSave
Tribal Mandala stencils are oh so popular! This beautiful New Tribe Mandala stencil can be stenciled on wooden floors, decks, tables and even reclaimed wood! Unlike mandala decals, our reusable stencils allow you to paint mandalas with multiple colors. Although very intricate, our Mandala stencils are super easy to use, and even beginners get fabulous results!

For the mandalas that are 18" to 30", you will be receiving a full medallion. For the 36" and 44" mandalas, you will receive half of the design and to complete the medallion, pick up the stencil after completing one side, flip it and line up the registration marks (see photo above), tape it and do it again.

This medallion stencil is so easy to use, virtually anyone can do it. Simply tape it to the wall using BLUE painter's tape, then load your foam roller with the paint of your choice (latex or acrylic). Get rid of excess paint by rolling the foam roller over a folded paper towel. Then, just roll it over the stencil applying medium pressure for an instant fabulous result! Don't press on the roller too hard otherwise you might get some paint seepage under the stencil.


Want to learn the easiest stenciling technique? Here are the detailed illustrated Roller Stenciling Tips.


This is an easy design to stencil with a dense foam roller. For expert stenciling tips, please watch our How-to stencil videos! You'll find them extremely helpful for your stenciling project. Even beginners get great results!


Although most of our stencils do not require the use of spray adhesive, if your walls have a texture to them, it might be a good idea to use spray adhesive to help minimize paint seepage (Elmer's spray adhesive seems to be the best). Make sure you shake the can well and lightly mist (not drench) the stencil, and let it dry for a moment before positioning it on the wall. This step will prevent the adhesive residue transferring to the wall. You'll need to re-mist the stencil after a few repeats. Note: you will still need to hold the stencil in place with a few pieces of blue painters tape! Adhesive by itself is not enough to hold the stencil on the wall. Clean-up tip:Spray the stencil with Simple Green to help to remove adhesive residue and let it sit for a while before cleaning with soap and water. Please note that it is virtually impossible to get rid of all adhesive residue. That's why we personally prefer not to use it and just stick with painter's tape!


Stenciling on rough or textured walls may contribute to increased paint bleed. For more information on stenciling on textured walls, see our F.A.Q. section.


About seepage and imperfections: Even with a proper loaded roller and correct technique you might get some minor paint seepage here and there. In most cases it's not noticeable, especially from a couple of feet away and it can be easily touched up with a small brush. Don't forget that you're creating a "hand-painted wall finish".  A few imperfections and some paint seepage here and there are natural and inevitable for this type of work. To avoid seepage, use spray adhesive and less paint on your roller and brush.


Did you know you can stencil your own fabric and use it for curtains, tablecloths, pillows, etc.? When stenciling on fabric, please use stencil adhesive to ensure good results. First, tape your ironed fabric to the surface so it doesn't move around while you stencil. You'll get better results with stencil brushes, but sometimes roller can work too, depending on your fabric.  Add some textile medium ( sold in craft stores) to your acrylic paint. You can also get a specially formulated fabric paint, but, frankly, good craft acrylic paint with a dollop of textile medium mixed in works just as well, and costs way less! :)  Let the stenciled image dry completely, 24 hours is best, then heat-set it by ironing the fabric for about 20-30 seconds on a LOW setting through the piece of cloth. Heat-setting will cure the paint and will prevent it from being washed off in the washing machine. Always experiment with a sample of your fabric first to ensure good results. We have stenciled on silk, cotton, linen and even sheer fabrics with great results. It's always better if your fabric doesn't have too much texture.


All of our stencils are made of thick, sturdy but flexible 12 mil clear plastic, reusable, easy to clean and stenciler-friendly! In our 20+ years of professional stenciling this material has proven to be far superior than any other material we used, including the industry standard 8 mil mylar.

We are certain you'll notice the difference and will love working with it, just like all the folks who already bought our stencils.


Our stencils are made to last and with proper care and storage will serve you for long time.

SaveSaveSaveSaveSaveSave
Note: SaveSaveSaveSaveSaveSave

We won't sell or give your email away.

                   
-->
PHP Shopping Cart by ViArt Ltd